Cisco 8832-3PCC IP Conference Station with Multiplatform Phone Firmware designed for Cisco Webex Calling, Webex Calling Carrier, Cisco Broadworks and approved Unified-Communications-as-a-Service (UCaaS) platforms. This model includes the CP-8832-PoE= module, allowing you connect this speakerphone an Ethernet connection that is providing PoE from the network or from a separate PoE injector (sold separately).  See "Deployment" below to determine what peripherals are required to suit your Cisco CP8832-3PCC-K9= deployment requirements.

Features

●   3.9-inch 480x128-pixel color LCD

●   Textile cover for soft touch and durability

●   Large mute button in the middle of the device for easy access from all angles

●   LED indicator above the mute button showing the call status

●   Raised edge for easier handling and re-positioning on tabletop

●   Crisp, precise button tactility

●   Single USB-C port on the device to minimize the number of cables on the table (an Ethernet injector is required for any non-Wi-Fi deployment)

●   360-degree room coverage; base unit alone covers up to a 10-foot microphone pickup range

●   Single line with a user experience of multiple calls per line

●   Session Initiation Protocol (SIP) signaling

●   Codec support, including G.711(u/A), G.729a, G.729ab, iLBC, G.722, and OPUS

●   IPv6 support

●   Secure Hash Algorithm (SHA)-256 enabled for advanced security features

●   Mobile and Remote Access (MRA) support

●   Wi-Fi support

●   Wired extension microphone support (CP-8832-MIC-WIRED=)

●   Wireless extension microphone support (CP-8832-MIC-WLS=)

●   Daisy-chain support (CP-8832-DC=)

●   Client Matter Code (CAC) and Forced Authorization Code (FAC) Support

●   Compatible with both IEEE 802.3af and 802.3at Power over Ethernet (PoE) Class 3 consumption (both PoE and non-PoE Ethernet injector options are available)

Compatibility

• 3rd party call platforms including Asterisk, Broadsoft, Centile, and Metaswitch

Includes

• Cisco CP-8832-3PCC-K9 IP Conference Phone - Multi-platform SIP
• Cisco CP-8832-PoE power injector module (Power over Ethernet required - sold separately)

Not Included

• Power Adapter
• Power over Ethernet

Deployment

• For Wifi use, the CP-8832-PWR= is required (provides power only)
• For Power over Ethernet connection where power is coming from the network switch, use the CP-8832-POE=
• For standard ethernet connection (non-PoE), use the CP-8832-POE= and a Gigabit PoE injector with at least 18 watts output like the Speco POEINJ
• For standard ethernet connection (non-PoE), use the CP-8832-ETH=

New Product

These products are brand new and have never been used. They arrive in the original manufacturer packaging in pristine, factory-fresh condition.