Cisco CP-8832-3PCC-K9 IP Conference Phone - Spare - Grade A

Cisco 8832-3PCC IP Conference Station with Multiplatform Phone Firmware designed for Cisco Webex Calling, Webex Calling Carrier, Cisco Broadworks and approved Unified-Communications-as-a-Service (UCaaS) platforms. This model does not include the CP-8832-PoE= module.  See "Deployment" below to determine what peripherals are required to suit your Cisco CP8832-3PCC-K9= deployment requirements.

Features

• 3.9-inch 480x128-pixel color LCD
• Textile cover for soft touch and durability
• Large mute button in the middle of the device for easy access from all angles
• LED indicator above the mute button showing the call status
• Raised edge for easier handling and re-positioning on tabletop
• Crisp, precise button tactility
• Single USB-C port on the device to minimize the number of cables on the table (an Ethernet injector is required for any non-Wi-Fi deployment)
• 360-degree room coverage; base unit alone covers up to a 10-foot microphone pickup range
• Single line with a user experience of multiple calls per line
• Session Initiation Protocol (SIP) signaling
• Codec support, including G.711(u/A), G.729a, G.729ab, iLBC, G.722, and OPUS
• IPv6 support
• Secure Hash Algorithm (SHA)-256 enabled for advanced security features
• Mobile and Remote Access (MRA) support
• Wi-Fi support
• Wired extension microphone support (CP-8832-MIC-WIRED=)
• Wireless extension microphone support (CP-8832-MIC-WLS=)
• Daisy-chain support (CP-8832-DC=)
• Client Matter Code (CAC) and Forced Authorization Code (FAC) Support
• Compatible with both IEEE 802.3af and 802.3at Power over Ethernet (PoE) Class 3 consumption (both PoE and non-PoE Ethernet injector options are available)

Compatibility

• 3rd party call platforms including Webex Calling, Asterisk, Broadsoft, Centile, and Metaswitch

Includes

• Cisco CP-8832-3PCC-K9= IP Conference Phone - Multi-platform SIP (spare)

Not Included

• Power Adapter (sold separately)
• Power over Ethernet (sold separately)
• Cisco CP-8832-PoE= power injector module (sold separately)

Deployment

For Wifi use, the CP-8832-PWR= is required (provides power only)

For Power over Ethernet connection where power is coming from the network switch, use the CP-8832-POE=

For standard ethernet connection (non-PoE), use the CP-8832-POE= and a Gigabit PoE injector with at least 18 watts output like the Speco POEINJ

For standard ethernet connection (non-PoE), use the CP-8832-ETH=

Grade A Refurbished

Functionality
Cosmetics

All refurbished items are restored to full functionality, and their grades reflect only cosmetic condition. Lower-grade products may have more visible blemishes but are rigorously tested and cleaned to ensure identical performance and warranty coverage.