Dynatel 965DSP 3M Subscriber Loop Analyzer 965 DSP Ver 7.00.2 NO TDR

Features

The 3M Dynatel 965DSP Subscriber Loop Analyzer is a microprocessor-controlled  integrated test set that provide full-featured POTS and fundamental ISDN testing. The functions include fault location and repair verification on twisted-pair, quad and coaxial cable (utilizing capacitance bridge, resistance bridge and Time Domain Reflectometer
(TDR) functions). The Dynatel 965DSPsubscriber loop analyzer executes  a wide range of individual tests, or performs automatic test routines as specified by the user to categorize and sectionalize problems. Specific tests and measurements performed by the unit include:
• Voltage – detects and measures the presence of exchange or foreign DC or AC voltages.
• Tone – provides a test tone for conductor identification; user-selected tones from 1 to 40 kHz for transmission measurements.
• Current – measures DC loop current.
• Ohms – measures conductor and insulation resistance up to 1000 megohms.
• Resistance fault location – displays distance to fault.
• Opens – locates opens at distances up to 100,000 ft. (30 km).
• Splits – locates splits on paired cable.
• Ringer count – counts the number of ringers on a particular loop.
• Load coil count – indicates the presence of load coils in loop circuit.
• Wideband loss – loss measurements to 200 kHz for pre-qualifying ISDN and HDSL.
• Loss – measures voice band loss.
• Noise – measures noise metallic and noise to ground in dBrnc.
• Longitudinal balance – provides active measurement of line balance.