EnGenius 490 Base Unit (EP-490)

Engenius 490 System Features

• Antenna
• When selecting a location for the base station, it is better to locate the base station as high as possible to avoid obstructions that may interfere with radio transmission.
• When using an outdoor antenna, locate the antenna (not the base station itself) as high as possible for a clear transmission path.
• Audio-in Jack (3.5 mm)
• Provides MOH (Music on Hold).
• Line Status LED’s
• LED lit indicates an active telephone line.
• Power LED
• LED lit indicates base station has power.
• Line In
• Supports 4 simultaneous telephone line connections.
• Four standard RJ-11C/CA-11A connectors.
• DC In
• Connects to Base Station AC Adapter.
• Registration Key (REG)
• Enters registration mode along with handset, assigns handset ID (10-99).
• Reset Button
• Restores base station to factory settings:
• Base Station security code
• Auto-Attendant (AA) configuration:
• On/Off, default = Off
• Number of rings before AA picks up, default = Custom greeting message cleared
• ID assigned to a phone line when AA is disabled, default = ID 10
• Operator ID, default = ID 10
• Registered handset ID table cleared
• Call Forwarding table:
• Call Forwarding On/Off for all registered handsets, default = Off
• Clear Call Forwarding numbers for all registered handsets

Compatibility

• Engenius EP-490 Handset
• Engenius DuraFon 4x